This packaged kit was designed to be used with a Dodge 29 spline 4 wheel drive NV4500.
The overall length is 27.50".
All Ford transfer cases, whether NP208, BW1345 or BW 1356, always require a 31 spline male input shaft.
There is a variation in required stickout length for Ford 4WD transfer case input splines which varies between .750" and 1.50".
Our transfer case adapter fits all the different output shaft stickouts; however the NV4500 stock output shaft or our spud shaft may require shortening to fit properly.
The cutoff length of the Dodge NV4500 output shaft can be determined by the amount of the desired stickout length of your new 31 spline spud shaft.
We include a new rubber crossmember support to fit our adapter.
The stock crossmember will require some modifications to bolt to our rubber crossmember support.
This kit also includes a transfer case shifter linkage bracket. This bracket provides the mounting hole for the shifter pivot bolt.
The bellhousing adapter plate in this kit retains the stock bellhousing.
This kit requires the use of a stock Ford bellhousing with a 4.848" index diameter.
The stock clutch disc must be changed to a 1-1/8" 10 spline to fit the NV 4500 transmission. |
