Dana 44 Timken Wheel Bearings, Races & Seals Kit
- Two Timken outer wheel bearings and races
- Two Timken inner wheel bearings and races, and 2 hub seals!
- With SINGLE PIECE hub seal.
Does not work with 1987-88 Bronco & F150 with "top-hat" style hubs.
Dana 44 half ton truck outer wheel bearing and race specs:
Brand Timken
Bearing Type Wheel Bearing
Cup Outside Diameter (IN) 2.89
Cup Outside Diameter (MM) 73.41
Cone Bore (IN) 1.63
Cone Bore (MM) 41.28
Width (IN) 0.58
Width (MM) 14.71
Package Type EACH
Package Qty 1
Weight 0.66 LB
Country of Origin United States
Dana 44 half ton truck inner wheel bearing and race specs:
Brand Timken
Bearing Type Wheel Bearing
Cup Outside Diameter (IN) 3.06
Cup Outside Diameter (MM) 77.70
Cone Bore (IN) 1.78
Cone Bore (MM) 45.21
Width (IN) 0.59
Width (MM) 15.01
Package Type EACH
Package Qty 1
Weight 0.79 LB
Country of Origin United States
Dana 44 hub grease seal specs:
Bore (In.) 3.297
OD (In.) 3.304
Width (In.) 0.327
Bi-directional lip design
Shaft size (In.) 2.5
NOTE:
- IF YOU HAVE A 1994-96 CHECK YOUR SPINDLE TO MAKE SURE WHICH HUB SEAL YOUR TRUCK USES!
- DoesNot 1987 or 1988 With Special Hub Lock Assembly
- Does NOT fit tophat style front locking hubs
Fits the following trucks:
1980-95 Ford Bronco
1980-95 Ford F150 4wd
1980-82 Ford F250 4wd with D44 | 
