|
This packaged kit was designed to be used with a Dodge Standard Duty 29 spline 4 wheel drive NV4500.
The overall length is 27.50".
All Ford transfer cases, whether NP205, NP208, BW1345 or BW 1356, always require a 31 spline male input shaft.
There is a variation in required stick out length for Ford 4WD transfer case input splines which varies between .750" and 1.50".
Our transfer case adapter fits all the different output shaft stick outs; however the NV4500 stock output shaft or our spud shaft may require shortening to fit properly.
The cutoff length of the Dodge NV4500 output shaft can be determined by the amount of the desired stick out length of your new 31spline spud shaft.
We include a new rubber crossmember support to fit our adapter.
The stock crossmember will require some modifications to bolt to our rubber crossmember support.
KIT CONSISTS OF:
No. Qty Part No. Description
1. 1 Kit 50-0220 4WD 29 SPLINE NV4500 TO FORD NP205 31T
2. 1 Kit 712551 DODGE NV4500 TO FORD V8 BHSG.
3. 1 Kit 716050D1 NV4500 SHIFT HANDLE ASSY.
4. 1 Kit 716101-2 CHEVY/NV4500 TRANS RUBBER MT.
INSTALLATION NOTES:
This kit is designed to fit the Dodge Standard Duty 29 spline NV4500 transmission.
This kit requires the use of a stock Ford bellhousing with a 4.848" index diameter.
Remove the stock tailhousing and install the new adapter housing provided in this kit. Refer to the 50-0207 Instruction Sheet.
|
