|
Ford Bronco & Ford F150, F250, F350 4x4 4.5 Shackle Flip Kit
Bare steel.
Tired of the weak torch and turn shackle flip kits. Want something strong and attractive looking? Need it to bolt on? We've covered it all with our bolt on shackle flip kit for the rear shackle on almost any Ford pickup or Bronco with 3" wide rear springs.
Moves the shackle forward 1 inch for better ride and angle, bolts to stock location of factory upwards shackle hanger, constructed of 1/4 and 3/8ths steel plate, laser cut and CNC formed.
The Ford shackle flip kit bolted in the stock location adds Aprx. 4.5 inch's of lift. Some may prefer to weld on the bracket, depending on location this will add or subtract lift on the principal of an one inch shackle movement adds or subtracts 1/2 inch of lift.
On Bronco based vehicles, no modifications are needed to correct pinion angle if only the flip kit is used.
On long wheel base vehicles, using factory blocks, we recommend a 4 inch lift block with a 4 degree taper replace the factory blocks, in reverse of stock. This will correct pinion angle and move the axle slightly rearward.
On vehicles using aftermarket lift springs, it may require that you move the front solid hanger rearward up to 2 inch's.
1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1993, 1994, 1995, 1996 Ford Bronco
1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1993, 1994, 1995, 1996 Ford F150, F250, F350 4x4
|
