|
1650 Flowkooler 5-13/16" Clockwise Rotation Driver's Side Inlet Water Pump
Small block Ford running hot? Looking for the driver's side hose connection? Flowkooler designed a high flow water pump with a CNC machined billet impeller to increased vane count and a reduced casting-to-impeller vane clearance. It achieves greater flow rates, higher head pressure and a more efficient flow. The impeller color is due to Type II Class II military grade surface coating which protects against corrosive fluids.
FlowKooler introduced the first hi flow pumps and continues to improve impeller design. Why is increased flow so important to cooling a hot Ford engine? Because it has been proven time and time again that reducing the cycle time between the heat source and the heat sink creates more opportunities to shed heat and drop engine temperatures.
From 0-3,300 RPM…Nothing Beats a FlowKooler!
General Specifications:
- Type of Material of Pump Body Aluminum
- Number of Blades on Impeller 16 CNC Aluminum (MiraKool)
- Direction of Rotation Clockwise (N.B. The casting shape prevents reversing flow of this pump)
- Fan Hub Working Height 5 13/16"
- Bolt Hole Sizes: 3/8"
- Number of Threaded Bracket Bolt Holes on Pump Body: 4
Hose Connections: 1st 2nd
Gender Male Male
Diameter 5/8" 5/8"
Other Special Features:
- 16 blade CNC Machined Aluminum impeller
- Protected with Military Grade Type II Class II surface coating
- Impeller chamber is directional to clockwise rotation
- Lower radiator hose exits left side (driver's side)
- Alternate part numbers C9TZ8501A, D00Z8501C, D0AZ8501F, D0OZ8501B, D0OZ8501C, D0ZZ8501A, D0ZZ8501B, D5UZ8501A, D6AZ8501B, D6ZZ8501B, DOAZ8501F, DOOZ8501A, DOOZ8501BF, DOZZ8501A, DOZZ8501B, 1251230AL, 16231, N251230AL
FLOWKOOLER, maker of high-output automotive waterpumps, has increased the number of impeller blades from eight to 16 blades on this Bronco water pump, further increasing the low RPM performance of their product.
The new patent-pending MIRAKOOL 16 (M-16) FLOWKOOLER impeller more than doubles the water flow rate at idle, yet drops back to stock output at 3,500 RPM, avoiding too much water flow at higher RPM.
By doubling the GPM output, FLOWKOOLER water pumps solve engine overheating at idle.
Independent testing by a major engineering university and the world's largest automotive manufacturer has proven FLOWKOOLER pumps out-perform all other makes at low speeds.
OTHER SPECIAL FEATURES:
- Impeller blades at right angles to shaft
- Impeller chamber is directional to clockwise rotation
- Lower radiator hose exits left side(driver's side)
PARTS CONTAINED IN BOX:
- (1) Mounting Gasket
- (1) Heater Hose Adaptor (Black)
- (1) Installation Sheet
- (1) FLOWKOOLER Decal
Other recommended parts:
Thermostat
Thermostat housing
Bypass hose
Radiator hoses
Heater hose kit
FlowKooler guarantees that its products are free from defects in faulty workmanship and defective materials for a period of two years from the purchase date. This warranty is valid only if it is determined to FlowKooler's sole satisfaction that the products are, and have been subjected to, ordinary use and service and have been properly installed by the purchaser (see instructions shipped with product).
FlowKooler’s Warranty is null and void if the product is or has been altered in any way e.g. polishing, chroming, powder coating used for racing, blown up, burnt stators or stripped rotor threads, cracked housings, blown bearings or shaft breakage, scratched or damaged due to incorrect installation and/or over-tightened.
This warranty does not apply to any product where failure is a result of misapplication, improper use, or maintenance nor is there any warranty expressed or implied as to the merchandise-ability of the product.
This warranty is valid for the original purchaser and is not transferable.
FlowKooler in no event shall be liable for labor, special or consequential damages, property damage or bodily injury or death or damages to or loss of use of any property directly or indirectly attributable to our products and under no circumstances any charges in excess of the invoice amount of the product proven to be defective.
If any product fails to conform to these warranties FlowKooler will, at its sole option and as its sole and exclusive liability hereunder, replace the product proven to be defective.
THIS WARRANTY PERTAINS TO PURCHASES MADE AFTER AUGUST 1, 2010. IT EXCLUDES ALL OTHER EXPRESSED OR IMPLIED WARRANTIES, ORAL OR WRITTEN WARRANTIES, INCLUDING WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Ships Directly from Manufacturer
Normally takes 2-4 weeks
|
